 Posted: Tue Sep 01, 2009 10:38 pm Post subject: |
|
| i'll look tommorow & get back to you. | |
| Posted: Tue Sep 01, 2009 12:37 pm Post subject: |
|
| Alex
That's a very kind offer, mine have all gone rusty and really drag the car down. Do any of your stash still have their plating intact? Cheers J. |
|
| Posted: Tue Sep 01, 2009 12:03 pm Post subject: |
|
Standard bolts are ok on the P4s also. Unless my wheels are about to drop off  |
|
| Posted: Sun Aug 30, 2009 11:22 pm Post subject: |
|
Im very sure any standard 33 bolt will be fine, the P4 came with a slightly different bolt because the alloy bit of the wheel between the hub & the bolt is thinner than usual, so therefore shorter bolts were used. Other than this, all 33 bolts are the same. If you need any used bolts i have dozens, yours if you need them, (i could use the space).  |
|
| Posted: Sun Aug 30, 2009 11:01 am Post subject: Wheel bolts |
|
| I have the OE 10 hole Speedline alloys and could do with some new wheel bolts.
Will any of the standard M12 x 1.25 with a 60° taper be suitable? Cheers J. |
|