Alfa Pages

Rees Cees · Posted: Sat Nov 05, 2005 1:55 pm Post subject: New here

Hello,

Let me introduce me to all of you here on the 33 forum. I have already posted some things on the board about (race) 33´s.

I am a 33 freak because I race with an 33. I have been racing with 33´s for almost 5 years. I started with thise one:

An old Dutch Alfa Romeo Dealer car.
But after 2 years and 2 crashes it was no loger to use for racing.

So I built a new racer an 33 SW.

The specs of this car are:

1750cc 16v engine with car´s (home made). (180 hbp and 210 nm tork)
Laser race exhaust.
gearbox with LSD.
suspention with uniballs.
special made KONI shokabsorbers.
Albi Datalog systhem.
Upgrades brakes Front 284 mm disks with 155 qv calipers, rear 239mm disks with Alfa Sud calipers.
Goodrich brake hoses (complete)
GRP doors, front panels and hood.
weight about 850 kg.

Best regards

Rees Cees

tvatavuk · Posted: Sat Nov 05, 2005 6:38 pm Post subject:

Hi Rees,
it is nice to have someone like you here. More the merrier?
Hope that you will have time to continue with good and tested advices acompanied with pictures.

Welcome
_________________
Tino Vatavuk
Little black dress which replaced Alfa Romeo 33 S 16v Permanent 4 GMo

Ken McCarthy · Posted: Sun Nov 06, 2005 11:11 pm Post subject:

Welcome Rees

It will be good to hear some of the details of your car and how you went about setting it up.

Regards
_________________
Ken McCarthy - 16V Sprint

Rees Cees · Posted: Sat Nov 19, 2005 7:40 pm Post subject:

It´s wintertime so no racing.

At the moment the racecar is under construction. a new suspention is made by KONI racing special for me.

and the doors (front and rear), front pannels and hood are replaced by GRP parts.

All to save some weight (total about 50 kg)

and I did some paintwork

Rees Cees · Posted: Fri Dec 02, 2005 10:39 pm Post subject:

some more new pictures.

tvatavuk · Posted: Sat Dec 03, 2005 1:30 pm Post subject:

Hi, nice pics there.
Few years back I was thinking of adding 2-3 side scoops for air intake on same place you put upper grill mesh, but could figure out what to do with cleaning fluid bottle Smile

I had a look this past few days on my 33 P4, which has ABS, and wheel mount has less space because of ABS sensor mount on it and ABS toothed gear.
From what I can see on pictures you don't use ABS (there is no cable for sensor), this is because you couldn't put bigger brake calipers, racing regulation or both?
_________________
Tino Vatavuk
Little black dress which replaced Alfa Romeo 33 S 16v Permanent 4 GMo

Scott Sander · Posted: Sat Dec 03, 2005 2:02 pm Post subject:

Rees,

Good pics, keep up the good work
_________________
Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com

Rees Cees · Posted: Mon Dec 19, 2005 11:11 pm Post subject:

and here the new collor:

Tenman · Posted: Tue Dec 20, 2005 1:02 am Post subject:

respect, good effort sir Smile

Rees Cees · Posted: Sat Jan 21, 2006 12:24 am Post subject:

some new pic´s

Rees Cees · Posted: Sat Jan 28, 2006 3:32 pm Post subject:

[/