| Author |
Message |
| johnboy |
Posted: Thu Apr 21, 2011 11:51 am Post subject: |
|
Cheers but I should have them covered! God knows when I'm ever going to start my 33 resto
One day, hopefully this year, but it seems to be flying by!! |
|
 |
| BigAl |
Posted: Thu Apr 21, 2011 11:20 am Post subject: |
|
| No worries Johnboy, thats what were here for, the difference is 7mm, I got 2 3mm spacers made. Let me know if you want my engineer guy to make some for you. |
|
 |
| johnboy |
Posted: Thu Apr 21, 2011 11:12 am Post subject: |
|
Cheers for the info chap  |
|
 |
| BigAl |
Posted: Thu Apr 21, 2011 11:00 am Post subject: |
|
Alex, thanks for the offer but all is good.
Johnboy, you are more than welcome to them and I recomend them and that you get spacers made if not here is what will happen to the bushes
It will also upset your steering geometry without them, since fitting them I have noticed less tyre wear and less pulling to one side. |
|
 |
| johnboy |
Posted: Thu Apr 21, 2011 8:47 am Post subject: |
|
Hi chap
I could be interested in those  |
|
 |
| 33bits |
Posted: Wed Apr 20, 2011 11:03 pm Post subject: |
|
| Al, i have some spare poly bushes for the 33 and i think they have certain spacers & washers with them, if so there will be spares. Also i have lots of various poly bits for my 155, i know some of them are duplicates so there may be spare spacers there to, i'll look on friday for you. |
|
 |
| BigAl |
Posted: Wed Apr 13, 2011 2:40 pm Post subject: |
|
Here is a pic of the spacers,
 |
|
 |
| BigAl |
Posted: Fri Sep 10, 2010 12:36 pm Post subject: |
|
Truck place had 50mm only
From Powerflex
52mm will be fine if the diameter of the bush is 53mm. There’s not enough material left of the bush to be able to fold over the washer
What is your address and I’ll get some sent?
impressed once again |
|
 |
| BigAl |
Posted: Sat Sep 04, 2010 8:48 pm Post subject: |
|
Looks like i may have to get something made, A friends dad has access to a CNC machine, I am just waiting to see if he can do it and a cost
What a PITA, 53 or 55mm washers shouldn't be that hard to find, I know of a truck place that i called and was told to pop down and ask the mechanics???? |
|
 |
| johnboy |
Posted: Sat Sep 04, 2010 8:12 pm Post subject: |
|
| BigAl wrote: |
Thanks John,
I tried ebay, no joy, the largest I can find is 50mm  |
What about a circle cut on a drill? Get a sheet of steel job done! |
|
 |
| BigAl |
Posted: Sat Sep 04, 2010 6:59 pm Post subject: |
|
Thanks John,
I tried ebay, no joy, the largest I can find is 50mm  |
|
 |
| john 33_16v |
Posted: Sat Sep 04, 2010 8:17 am Post subject: |
|
| BigAl wrote: |
| Does anyone know where I can get some washers/spacers that are m12 with an OD of at least 53mm |
They must exist- will probably be called 'repair washers', try google search, orbital fasteners or even ebay.
John |
|
 |
| BigAl |
Posted: Fri Sep 03, 2010 10:40 pm Post subject: |
|
| Does anyone know where I can get some washers/spacers that are m12 with an OD of at least 53mm |
|
 |
| BigAl |
Posted: Fri Sep 03, 2010 3:07 pm Post subject: |
|
here is a vid of the new bushes in place
as you can see its back to how it should be
pmsl
 |
|
 |
| BigAl |
Posted: Fri Sep 03, 2010 12:25 am Post subject: |
|
Ok very confused here.
When I first ordered my bushes I got the complete rear set and fitted them. I was so impressed I then bougth the complete front set and fitted them.
Today when I went to replace the rear bushes, the numbers on them were PFF1-102 instead of PFR1-111, low and behold the front ones were PFR1-111.They look the same, apart from the number, I confirmed the numbers on Powerflex's site. I wonder if there has been a number change since I bought mine, lol.
Anyway, what a PITA it was to fit these new rear ones with the 10mm slice in the middle, the little cut-outs have been removed and when you try to push in the sleeve there is no where for the air to go so it pushes the other side out, as the copper slip makes an airtight seal, as it is very tight .
Anyhow I got them in, wow back to how it should be and very happy, I will post up another vid tomorrow to show the difference. The only movement is the tyre wall once again, how it should be.
As for the fronts I went to fit the bushes today but didn't as they are still the same as the ones that are in there.
you can see the bush being pinched
When I undo the bolt you can see how short the bushes are.
This is why I have said to people to pack out the gap with washers that are the same size, or larger, than the bush.
I remembered I have a spare Front Inner Wishbone with original bush, its 53.5, assuming this is the beast
 |
|
 |
| BigAl |
Posted: Tue Aug 31, 2010 4:51 pm Post subject: |
|
Got my bushes today, very impressed with the customer service from Powerflex and would recommend to anyone.
One thing i noticed is that there is no writing on the side of the bush
I will fit ASAP, very pleased. |
|
 |
| BigAl |
Posted: Wed Aug 25, 2010 3:45 pm Post subject: |
|
Alex, get them on asap.
I just called powerflex, they did reply to my emails but they were not getting delivered
(PFR1-111) Rear Beam Link Location Bush x2 being sent asap, should be with me in a week.
They looked at the video and agree there is movement there.
I asked if a lowered car, with more lateral force from the panhard rod would have an effect, they said no
(PFF1-102) Front Inner Wishbone Bush x2 being sent asap, they didnt want the damaged ones back as a picture would suffice.
I think I will re-grease every 1- 2 years.
Hows that for customer service?? |
|
 |
| 33bits |
Posted: Tue Aug 24, 2010 8:35 pm Post subject: |
|
Ive got a set of poly bushes for my sw, still sat on the shelf, i prob should fit the things really. I think i may have a duplicate set of lower arm poly bushes, ill look. |
|
 |
| BigAl |
Posted: Mon Aug 23, 2010 8:44 pm Post subject: |
|
| I forgot to say that I emailed Powerflex on Friday night, I didn't get a reply today, I will call them tomorrow. |
|
 |
| BigAl |
Posted: Sat Aug 21, 2010 7:40 pm Post subject: |
|
Both rear wheel bearings were done 2 years ago and 1 was replaced before last mot due to failing and both were ok at last mot. My mot is due and checking them is part of my pre mot adjustments, along with adjustment of the hand brake ect ect.
I will have a look but i am sure i have rocked the car by the wheel in the past.
Thanks for the suggestion
Just checked, there is a little play on the OS but you can clearly see lots of movement in that there bush  |
|
 |
| Guest |
Posted: Sat Aug 21, 2010 7:05 pm Post subject: |
|
| could the excessive side ways movement made worse by play in your rear wheel bearings?. |
|
 |
| BigAl |
Posted: Sat Aug 21, 2010 6:13 pm Post subject: Re: powerflex bushes |
|
Not that hard, just rocking really.
Seriously, once you have powerflex'd your car you wont regret it, I too was put off by people saying it will squeak, no problems whatso ever.
| BigAl wrote: |
| When I first fitted the bushes I could push the rear of the car sideways and there would be no body roll whatsoever and only flexing of the tyre wall. |
They were all greased up when fitted  |
|
 |
| Oggie |
Posted: Sat Aug 21, 2010 5:52 pm Post subject: |
|
| How was your car when the bushes were first fitted, I think they have either shrunk due to lack of grease and it looks quite rusty down there which may have an effect on silicone?. |
|
 |
| Ian M |
Posted: Sat Aug 21, 2010 5:39 pm Post subject: |
|
Al how hard were you pushing it to make it move like that?
Ive just been out and given mine a shove or two and I cant make it move that much.
And my old series 2 is running on (knackered out) standard rubber bushes.
I was going to powerflex it but not so sure now.  |
|
 |
| BigAl |
Posted: Fri Aug 20, 2010 8:21 pm Post subject: |
|
ok guys and gals,
heres the video
 |
|
 |