Alfa Pages

All from a 1992 (K reg) P4 (all in good working condition)

Power steering rack - £30
Starter motor - £10
2 x Driveshafts and hubs (good boots) £15 each
3 x central locking motors £3 each
P4 ECU ...

Power steering rack, P4 rear struts, P4 4x4 ecu, loads of other bits

E mail me requests.

Cheers Paul.

I am trying to clear out the last few bits and pieces from my crashed P4.

I have the following for sale:-

Power steering rack (offers)

Starter motor £15

Alternator £12

P4 rear shocks £1 ...

Hi Tino, thanks for the advice about the lambda sensor, but I am sure that it is a proper Alfa one as it was fitted by a specialist Fiat/Lancia/Alfa garage and cost around £80. Also my car has had thi ...

Hi everyone. Anyone who has been on this discussion list recently will probably know that I have been having some intermittant running problems with my M reg 16 valve (with CAT) and I have still not m ...

Hi there. I am in need of a decent Air Flow meter for my 16 valve. Do you have one and how much?

Cheers Paul.

Hi all. Some of you may have been following my trials and tribulations with my 16 valve over the last few weeks and there is loads of stuff about the problems I've been having in the post entitled 'He ...

Hi All. Despite trying a few things my 16 valve still seems reluctant to run properly when the engine is cold or not fully warmed up. if it is started with a warm engine it seems to be fine. The tappe ...

Referring to my last post, I forgot to mention that I have a noisy tappet on the front right hand side of the engine (looking from behine the steering wheel) and it is particularly noticable when the ...

I was reading some of the old posts on this site a saw that a couple of guys had suffered from running problems with their 16 valve 33's when the engine was first started but as soon as it had run for ...

Hi Matt, Thanks for the advice about the crappy mod resistor!! It has already found it's way into the bin. Think I'll get myself a BBR Starchip as they are only £121 inc vat and post. Cheers Paul.

Hi There, I'm afraid it won't fit a P4 only a standard 33 16 valve.

Paul

The part arrived in the post today and unfortunately it is a bit crap, just a tiny resistor or something with a thin wire coming out of each end. Apparently you disconnect the air temperature sensor l ...

With all the goodies that come with this car, the low mileage and the excellent condition, you are surely not asking for £550 are you??
Thats what is at the bottom of your post?

Cheer Paul

I have had a bit of a 'mare' with my M reg 16 valve over the last few weeks. Basically the engine was running really badly and was slowly getting worse. Basicaly it was misfiring and refusing to idle ...

HI All. I have a chip for sale which came out of the ECU from my crashed K reg P4. I am almost certain that it is an aftermarket chip, as it has a handwritten sticker on it saying 33 16 Valve. Also my ...

I have an OMP sports backbox for a Mk3 16 valve. Its in very good order £35 to clear plus post.

Cheers Paul.

Hi all. I have been having some problems with my M reg 16 Valve 33 and the way it runs. This is not helped by the fact that I live out in the sticks in North Wales and Alfa specialists are virtually n ...

Hi Gary, Thanks for the tip about checking the handbrake. I tried pulling the handbrake lever on with the car on a slight slope and at three to four notches up the car still rolls (ie the wheels aren' ...

I was hoping for some advice on how to get the best out of the brakes on a 16 valve 33. I have an M reg 16 valve with the standard rear drums and grooved/vented RED DOT discs at the front with RED DOT ...

Hi Chris.
The OMP backbox is in excellent condition, as it was only fitted to my car for about two months. It has been stored in the dry since and I have sprayed the pipes and silencer in matt black ...

I still have the OMP sports back box for sale which will fit a 16 valve 33. I have cleaned it up and repainted it with heatproof laquer. Anyone want it for £40?? I also have several other bits such as ...

I have already got someone who is having the engine and gearbox and unfortunately the remains of the car went off to the scrappy to be crushed yesterday...with the fuel tank still attached!! Sorry.
...

Hi all. I have finally finished stripping down my crashed P4 so that there is virtually only the body shell left!! I have removed the ecu from under the p/s dash and out of interest opened it up to ha ...

Hi Simon. I still have the wheels. If you still want them, give me a call. My mobile is (07974) 138540. Leave a message on the answer service. Cheers Paul.