Author |
Message |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Fri Oct 03, 2014 1:26 pm Subject: 33 1.7 16V not starting |
Any chance that the injectors are leaking? You can remove the fuel rail and observe the injectors for leaking in a jar or a container.
No they are not.
I did almost that, I removed the left fuel r ... |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Fri Oct 03, 2014 10:18 am Subject: 33 1.7 16V not starting |
Thanks.
So mine is fine.
yesterdey night I checked and found 2500 ohms, the car is on the garage and the temp was probably near 20š C
Problem still here, if it doesnīt start at first time, the ... |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Thu Oct 02, 2014 10:07 pm Subject: 33 1.7 16V not starting |
Does anyone know the resistence value of the water temp sensor?
Thanks |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Fri Sep 26, 2014 11:18 pm Subject: 33 1.7 16V not starting |
Itīs still alive, but the problem is still there.
Today I tried to start the engine and it didnīt start again.
Remove 2 spark plugs and again they were full of fuel.
Cleaned and put them back and ... |
Topic: So my 33 just caught fire... |
alfafan
Replies: 21
Views: 18039
|
Forum: Boxer Workshop Posted: Fri Sep 26, 2014 1:51 pm Subject: So my 33 just caught fire... |
Nylon fuel pipes on the intake are the best solution the manufacturer has installed. If you go to rubber hoses then they will fail every month...
Why do you say that?
What does the 33 16V has tha ... |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Thu Sep 25, 2014 10:19 pm Subject: 33 1.7 16V not starting |
Today I didnīt have much time because I had to replace My 156 1.8 TS lambda probe.
But I removed the fu#$ing plugs from the left side, cleaned them and put them back.
Now the engine works on 4 cilin ... |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Thu Sep 25, 2014 9:27 am Subject: 33 1.7 16V not starting |
only strange, it did not start after long standing in garage..
Youīre right
Its strange.
I didnīt change anything, I only checked conections (and they were fine), and if the timing was right!!!
... |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Wed Sep 24, 2014 9:57 pm Subject: 33 1.7 16V not starting |
Its alive...
It just started!
I talked with a good friend of mine that is an Alfa specialist and just by hearing on the phone the car trying to start, he told me that probably the engine wou ... |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Wed Sep 24, 2014 4:47 pm Subject: 33 1.7 16V not starting |
Thanks for your reply.
Turns out that even though there was a visible spark it just wasn't strong enough.
It is strong for sure, I have experience how to check that.
have you some bang ... |
Topic: 33 1.7 16V not starting |
alfafan
Replies: 18
Views: 17173
|
Forum: Boxer Workshop Posted: Wed Sep 24, 2014 12:01 am Subject: 33 1.7 16V not starting |
Hi
About an year ago I rebuid the engine of my 33 1.7 16V QV (non cat), put it back on, connect everything but when I tried to start it, it didnīt start.
At the time I discovered a relay (right si ... |
Topic: Speedo 33 Gearbox connect to Sprint speedo instrumentpanel |
alfafan
Replies: 3
Views: 2026
|
Forum: Boxer Workshop Posted: Sat Apr 28, 2012 9:50 pm Subject: Speedo 33 Gearbox connect to Sprint speedo instrumentpanel |
Later Sprints, had the engine/gearbox/front brakes from the 33, so they have already the electronic speedometer.
Not true, Paulo...
Later Sprints still came with mechanical speedo...
It is poss ... |
Topic: 1.6 145 engine into 33 imola |
alfafan
Replies: 16
Views: 7267
|
Forum: Boxer Workshop Posted: Sat Apr 28, 2012 9:44 pm Subject: 1.6 145 engine into 33 imola |
Ok, I think this one is put to bed. Many thanks for the info gents, I think I'll just run it through the summer as I planned and go the 16v on carbs route if I can get hold of the engine. I already ha ... |
Topic: Brake calipers |
alfafan
Replies: 0
Views: 1412
|
Forum: Boxer Workshop Posted: Sun Mar 25, 2012 11:21 pm Subject: Brake calipers |
I have lots of replacement parts for my Sprints and 33s.
Today I was checking what I have of Brake system, and found some calipers.
I have the newer Girlling calipers and the old Ate.
The question ... |
Topic: 33 16V Head - manifold spacer |
alfafan
Replies: 14
Views: 4565
|
Forum: Boxer Workshop Posted: Tue Aug 16, 2011 1:58 pm Subject: 33 16V Head - manifold spacer |
Pedro, no result yet...
The engine is still out of the car.
Maybe next weekend it will work. |
Topic: 33 16V Head - manifold spacer |
alfafan
Replies: 14
Views: 4565
|
Forum: Boxer Workshop Posted: Mon Aug 15, 2011 11:52 pm Subject: 33 16V Head - manifold spacer |
Hi Paulo
Tomé from Fabrica Italiana told me about that, but also told me that in an injected car there is no problem about vibrations. In a carb version he wouldnīt advice removing but in an inject ... |
Topic: Fitting Larger brakes |
alfafan
Replies: 40
Views: 55914
|
Forum: Motorsport, Racing & Trackdays Posted: Wed Aug 10, 2011 7:05 pm Subject: Fitting Larger brakes |
I use the 284 mm disc from Alfa 155 TS 16V and adapters (made here in Denmark) to reposition the original calipers from Alfa 33 16V.
It is a cheap and effective change.
What is the difference? ... |
Topic: Koni Sport adjustment |
alfafan
Replies: 12
Views: 13366
|
Forum: Motorsport, Racing & Trackdays Posted: Wed Aug 10, 2011 6:48 pm Subject: Koni Sport adjustment |
Has anyone fitted Koni's from a ser1 strut to a ser 3
I am having serious problems.
For the rear you will have no problems.
For the front you will need the original Spica struts and to change t ... |
Topic: 33 16V Head - manifold spacer |
alfafan
Replies: 14
Views: 4565
|
Forum: Boxer Workshop Posted: Tue Aug 09, 2011 6:15 pm Subject: 33 16V Head - manifold spacer |
I talked with a very good friend of mine who prepares boxer Alfa Romeo for racing here in Portugal.
He told me that if if was a carb version I shouldnīt remove that as they have an anti vibration fun ... |
Topic: 33 16V Head - manifold spacer |
alfafan
Replies: 14
Views: 4565
|
Forum: Boxer Workshop Posted: Mon Aug 08, 2011 2:37 pm Subject: 33 16V Head - manifold spacer |
Now that part is not available from the factory.
So Iīm thinking to apply the throttle bodies without those spacers, as I dont see anything wrong doing that. |
Topic: Hydraulic lifter damage |
alfafan
Replies: 16
Views: 8508
|
Forum: Boxer Workshop Posted: Mon Aug 08, 2011 2:34 pm Subject: Hydraulic lifter damage |
Baiones has both versions, the 1.7 8V anda the 1.7 16V. |
Topic: 33 16V Head - manifold spacer |
alfafan
Replies: 14
Views: 4565
|
Forum: Boxer Workshop Posted: Mon Aug 08, 2011 2:31 pm Subject: 33 16V Head - manifold spacer |
Where did you hear/see this?
All Boxer 16V have it.
Its part 60525698
It has that part between the head and the throtle bodies with 2 card/paper gaskets. |
Topic: 33 16V Head - manifold spacer |
alfafan
Replies: 14
Views: 4565
|
Forum: Boxer Workshop Posted: Mon Aug 08, 2011 10:58 am Subject: 33 16V Head - manifold spacer |
All boxer engines have a spacer between the head and the intake manifold.
What are the consequences of instaling the manifold direct on the head without the spacer and only with the normal card gaske ... |
Topic: Inboard brakes caliper problem |
alfafan
Replies: 0
Views: 1027
|
Forum: Boxer Workshop Posted: Thu Apr 28, 2011 10:24 pm Subject: Inboard brakes caliper problem |
One of my Sprint front caliper (left) is leaking by the handbrake adjuster.
The car has inboard brake system.
When someone brakes we can see brake fluid comming out of the caliper where the adjuster ... |
Topic: Brake master cylinder |
alfafan
Replies: 5
Views: 2196
|
Forum: Boxer Workshop Posted: Fri Feb 11, 2011 10:55 am Subject: Brake master cylinder |
Was a strightforward fit according to my mechanic.
It is not a straight forward fit.
It almost...
You have to change one of the brake lines, the one that is below, but it is simple.
I put it on ... |
Topic: Brake master cylinder |
alfafan
Replies: 5
Views: 2196
|
Forum: Boxer Workshop Posted: Thu Feb 10, 2011 6:22 pm Subject: Brake master cylinder |
Yesterday I bought one and it costed me 59 euros.
It is in fact almost the same.
Did you found any improvement fitting the 75īs on the 33? |
|