Alfa Pages

Hi, We used a Dastek Unichip on our first engine.
-We used a 145 1700 16v, which runs on Bosch Motronic, and is already dizzy-less.
We did a straight transplant from the 145 to our car, inc. ...

While you are at it, can I recommend you make it stronger?

We have heard that these do actually bend!

Simple mod is to get a plate welded onto the "open side" with a hole in
where ...

Hi Ade,

I have been invited to Wyedean by a bunch of my hillclimb friends.
Had a look at the rally website the weekend, and was chuffed to see you on the list!!

I will be there, so happy to ...

Hi, Thanks for your comment.....

I have been told by a well know "old-skool" boxer Alfa specialist that each block was cored differently in the casting process.
Therefore, an 80mm (135 ...

Hi Paul,

Thanks for the kind offer.

I really need perfect 84mm bore's!
(The standard bore size is the one I need to use, coupled to a 64mm
crank, gives me 1418.7cc. Then add the 40% for fo ...

Hi All,

Now looking for a New Old Stock Alfasud crankshaft.....

64mm Stroke

As used on the standard 1286cc (1300cc).

Also, NOS 84mm Bore Block's. (1490cc /1500cc)

Many Thanks,

...

Hi All,

Looking for a new, old stock Alfasud block for the 1200, 1300 or 1350.
(ie. 80mm bore size)

Please email me, voodoosportscars@aol.com

Many thanks,
Graham.

Ex- Bob Godbold race car NGH straight cut dog box gear kit, inc. dog rings.

Nick Humpfrey made kit.

Shows some wear but may be of use to someone.

Asking £675.

(Dog rings cost the same ...

SUMP now sold.
-Many thanks Adrian.

Sorry for the delay.

Yes, no problem.
Email sent.

Best regards,
Graham.

Just advertised one on the forum!

Cheers,
Graham.

Hi All,
Having a bit of a clearout, so here goes.......

OMP comp. clutch kit for all sud/ 33's, and 1600 145/6's.

Uprated sprung cover (also balanced!)
Ceremetallic sprung centre 4 paddle ...