View previous topic :: View next topic |
Author |
Message |
Guest
|
Posted: Tue Apr 15, 2003 2:16 pm Post subject: Wiring info needed for 1.7 8V on carbs |
|
|
Hi,
I'm fitting the above engine into a VW Karmann Ghia but need info on wiring for the ignition...
There are 3 wires coming from the electronic ignition module, can you tell me which one is which? Once black (assuming earth), one white and one green.
I have done this before but can remember which way round they go!
Thanks in advance
Rich
PS if you wnat to see pics of the install, go to my website: www.ricola.co.uk |
|
Back to top |
|
|
Guest
|
Posted: Thu Apr 17, 2003 4:33 pm Post subject: |
|
|
Anyone? |
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Fri Apr 18, 2003 12:15 am Post subject: |
|
|
Hi
Looking at the workshop manual it looks like the black wire goes to earth while the green wire goes to the fusebox to get power while the white wire goes to the rev counter. Although I am not certain I suspect the black earth wire is wired through the electronic ignition module to actually generate the spark
All the best
Keith |
|
Back to top |
|
|
Guest
|
Posted: Mon Apr 21, 2003 10:24 am Post subject: |
|
|
Thanks Keith, that sounds right...
Rich |
|
Back to top |
|
|
Guest
|
Posted: Fri May 09, 2003 10:53 am Post subject: |
|
|
I was talking to someone on the Minari stand at the weekend briefly. He said that there were two types of coil with this engine. Can anyone tell me the different types and which one I would need? Is it to do with the different ignition systems?
Cheers
Rich |
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Fri May 09, 2003 11:14 am Post subject: |
|
|
Basically Bosch and Marrelli. The coils are not interchangeable. Most cars seem to have Bosch ignition systems
All the best
Keith |
|
Back to top |
|
|
Guest
|
Posted: Mon May 12, 2003 10:58 am Post subject: |
|
|
Thanks again Keith, I remember your help was very useful last time I did a swap!
Rich |
|
Back to top |
|
|
Guest
|
Posted: Tue May 27, 2003 1:21 pm Post subject: |
|
|
Another one: the vacuum hose for the distributer advance is missing. Where does this normally hook up to?
thanks again,
Rich |
|
Back to top |
|
|
ricardo Alfasud
Joined: 13 Mar 2003 Posts: 43 Location: wellington .... new zealand
|
Posted: Tue May 27, 2003 2:21 pm Post subject: |
|
|
the vac line hooks up to the upper brass tittie on the left hand carb cyl 4
make sure you have the little round pulse valve instaled in the line with the arrow on that heading toward the carb
is it a bosch or marelli dist? the marelli advance units often crap out , check the rod into the dist moves when you open the trottle _________________ alfa romeo trofeo series new zealand, video site .
http://alfa-racing.blip.tv/
alfatrofeo blog and interesting stuff .... unofficial ....
http://alfatrofeo.blogspot.com/ |
|
Back to top |
|
|
Guest
|
Posted: Wed May 28, 2003 9:34 am Post subject: |
|
|
The pipe was missing, is the anti-pulse valve really necessary?
It's a bosch distributor....
Rich |
|
Back to top |
|
|
Guest
|
Posted: Wed May 28, 2003 9:48 am Post subject: |
|
|
yep it sure will help.....
saves wreaking the advance unit ,,,and makes it work
that is if u have comp on cly 4 |
|
Back to top |
|
|
|