Alfa Pages Forum Index Alfa Pages
A forum for help with the Alfasud And Alfa 33
 

P4 light on

 
Post new topic   This topic is locked: you cannot edit posts or make replies.    Alfa Pages Forum Index -> Boxer Workshop
View previous topic :: View next topic  
Author Message
graeme
Alfasud


Joined: 16 Mar 2003
Posts: 64

PostPosted: Fri Apr 21, 2006 9:00 pm    Post subject: P4 light on Reply with quote

Sorry to ask this as I'm sure it's been raised many times in the past but the orange 4 x 4 light on my dash is on. Can anybody lead me through a list of places to look. The facts are

1) Light is always on
2) Get two clicks from the actuator thingy when ignition is switched on (which I gues is engagement then disengagement)
3) No clicks if ignition switched on with brake pedal pressed.
4) With the ignition switched on I'm sure I can hear a noise like that made by a radio when a mobile phone is about to go off, but at very low volume.

I assume that the fact I can hear the engement clicks means relays, fuses etc. must be sound.

Did I read correctly that the orange 4 x 4 light has two bulbs, and they both have to be working?

Thanks
_________________
16v p4 In pieces.
Back to top
View user's profile Send private message Send e-mail
tvatavuk
Gold Cloverleaf


Joined: 13 Mar 2003
Posts: 673
Location: Split, Croatia

PostPosted: Sat Apr 22, 2006 12:27 pm    Post subject: Reply with quote

Yes you have read it but they are in series so if only one burns, there will be not light at all.

Check that both switches on brake pedal work and click at same time.
Interference your radio is picking up is probably from EMC.
Relay can foul and work like that but I also don't think it is.

You should check "tooth mesh sensor" it is coil/mic that pickups noise from ECM on back of gearbox under propshaft. Connector is behind ashtray/shelve. It has 2 wires in black shield
It could be also ECM or some of it's wires damaged, its wires are in red coating, examine it from connector to gearbox.
_________________
Tino Vatavuk
Little black dress which replaced Alfa Romeo 33 S 16v Permanent 4 GMo
Back to top
View user's profile Send private message
graeme
Alfasud


Joined: 16 Mar 2003
Posts: 64

PostPosted: Wed Apr 26, 2006 8:45 pm    Post subject: Reply with quote

I've found that when the car is first started in the morning, the light is off and 4WD is working. After about 5 minutes driving the light comes on and I'm back o 2WD.
_________________
16v p4 In pieces.
Back to top
View user's profile Send private message Send e-mail
tvatavuk
Gold Cloverleaf


Joined: 13 Mar 2003
Posts: 673
Location: Split, Croatia

PostPosted: Fri Apr 28, 2006 9:16 pm    Post subject: Reply with quote

I would closely inspect both brake light switches.
_________________
Tino Vatavuk
Little black dress which replaced Alfa Romeo 33 S 16v Permanent 4 GMo
Back to top
View user's profile Send private message
paulhide
P4


Joined: 20 Dec 2003
Posts: 1607
Location: Oh Beautiful Billingham

PostPosted: Sat Apr 29, 2006 12:26 pm    Post subject: Reply with quote

There are two plastic buttons behind the brake pedal. One lights your brake lights and the other disengages the 4wd system. Make sure this is not sticking in the depressed position as if the brake pedal was still pushed against it. Otherwise could be a loose wire somewhere or even a problem with the second 4WD ECU in the back of the car. I probably have a spare somewhere at a cheap price if you run out of all other possibilities.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   This topic is locked: you cannot edit posts or make replies.    Alfa Pages Forum Index -> Boxer Workshop All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum