View previous topic :: View next topic |
Author |
Message |
ALFADELTA1975 Alfa Arna
Joined: 22 May 2005 Posts: 12 Location: The Netherlands
|
Posted: Wed Mar 27, 2013 9:20 pm Post subject: Alfa 33 P4 |
|
|
Hi everyone!
I might as well try it here as well Eventhough these parts are nowhere available...
For my Alfa 33 P4 i am looking for the front rubber bush and mount that holds the Ferguson coupling.
Also looking for a new or used steele pipe that goes to the petroltank.
Thanks!
Chris |
|
Back to top |
|
|
paulhide P4
Joined: 20 Dec 2003 Posts: 1607 Location: Oh Beautiful Billingham
|
Posted: Fri Mar 29, 2013 10:05 am Post subject: |
|
|
Hi Chris,
Do you mean a petrol tank strap?
Is the front bush the round one or the other one? _________________ Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188 |
|
Back to top |
|
|
ALFADELTA1975 Alfa Arna
Joined: 22 May 2005 Posts: 12 Location: The Netherlands
|
Posted: Fri Mar 29, 2013 4:33 pm Post subject: |
|
|
Hi Paul, its the steelpipe between the plastic mount and the rubber hose (and finally connected to the fueltank) I have al the parts new, except for the steel pipe which is not available here anymore.
Mine is in very poor condition i have to replace it on short notife. If i can't find a good replacement than I guess I have to weld it.
About the rubber bush and mount they are both round. Its not the big round one though. Maybe I can upload a photo later on. |
|
Back to top |
|
|
33bits 16 Valve
Joined: 23 May 2009 Posts: 1067 Location: Clevedon. North Somerset
|
Posted: Sat Mar 30, 2013 12:08 am Post subject: |
|
|
Post pictures of what you need, i may have them. _________________ 155 sportpack
33 16v Sportwagon
33 Permanent 4
33 16v (for sale)
156 JTS sportwagon
contact me for any 33 parts. Alex, 07896-327708
|
|
Back to top |
|
|
ALFADELTA1975 Alfa Arna
Joined: 22 May 2005 Posts: 12 Location: The Netherlands
|
Posted: Sat Mar 30, 2013 1:33 pm Post subject: |
|
|
I made some pictures of the front mount of the visco coupling. As you can see the rubber is broken.
I have just purchased the rear mount including rubber new. Strange that this particular part is still available here, and not the front one...
The steel (fuel) pipe of the 33 P4.
Hopefully you can help me out
[/b] |
|
Back to top |
|
|
paulhide P4
Joined: 20 Dec 2003 Posts: 1607 Location: Oh Beautiful Billingham
|
Posted: Sun Mar 31, 2013 9:53 am Post subject: |
|
|
Yes, I think you will need luck to find parts.
The reason why the other viscous coupling mount is still available is because it is the same as the 105 series cars' propshaft mount. _________________ Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188 |
|
Back to top |
|
|
|