View previous topic :: View next topic |
Author |
Message |
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Sun Sep 08, 2013 8:18 pm Post subject: wanted 1351 engine |
|
|
As title
Wantva spare engine for race car
Steve |
|
Back to top |
|
|
Joelomint Alfa Sprint
Joined: 08 May 2004 Posts: 119 Location: London
|
Posted: Fri Sep 13, 2013 4:04 pm Post subject: |
|
|
try Peter at alfasudparts, or John at justsuds
|
|
Back to top |
|
|
suds Alfasud
Joined: 25 Jun 2006 Posts: 70 Location: liverpool
|
Posted: Fri Sep 13, 2013 4:26 pm Post subject: |
|
|
Got a couple of them 1x compete with heads and 1x short block. based in liverpool. _________________ romance of rust
alfasud 1.5 ti
alfasud super 1.3
Alfa 155 2.0ltr 8v
Fiat croma 1.9jtd |
|
Back to top |
|
|
rob_mitch Alfa Arna
Joined: 26 May 2008 Posts: 2
|
Posted: Fri Sep 13, 2013 6:45 pm Post subject: Re: wanted 1351 engine |
|
|
stevecarrcross wrote: |
As title
Wantva spare engine for race car
Steve |
Hi,
I picked up a rebuilt engine a few years ago from EBay along with some other bits. Engine is currently in storage. I have some history somewhere ( moved house since) which I will try to find over w/end. I am pretty sure it was a 1286 but over-bored to next size. Just needs a 1350 crank ??
Any use to you?
Regards,
Rob _________________ rob_mitch |
|
Back to top |
|
|
astudialf Alfa Arna
Joined: 14 Sep 2013 Posts: 5 Location: south
|
Posted: Sun Sep 15, 2013 9:09 am Post subject: Re: wanted 1351 engine |
|
|
stevecarrcross wrote: |
As title
Wantva spare engine for race car
Steve |
I have a 1351 engine in good condition under my bench, based in the south. |
|
Back to top |
|
|
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Sun Sep 15, 2013 7:31 pm Post subject: |
|
|
How much |
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Mon Sep 16, 2013 12:15 am Post subject: |
|
|
Hi
Any particular 1351 engine? Screw tappets? Hydraulic tappets?
All the best
Keith _________________ I owe, I owe, its off to work we go.
Bimota Forum
Stafford Christmas Lights
|
|
Back to top |
|
|
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Mon Sep 16, 2013 7:28 am Post subject: |
|
|
Are the mounts the same cause if they are then either, I currently have a mechanical tappets one |
|
Back to top |
|
|
eagle3 Alfa 33
Joined: 11 Nov 2007 Posts: 402 Location: France
|
Posted: Mon Sep 16, 2013 7:49 am Post subject: |
|
|
As long as it's not an injection shouldn't make much difference. Best to get an engine with the original carbs as camshafts vary according to what carbs are fitted. _________________ Alfa33 QO 1984
Alfa33 1.3i.e. 1994 |
|
Back to top |
|
|
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Mon Sep 16, 2013 8:00 am Post subject: |
|
|
Currently have dellorto 45's on engine |
|
Back to top |
|
|
eagle3 Alfa 33
Joined: 11 Nov 2007 Posts: 402 Location: France
|
Posted: Mon Sep 16, 2013 9:13 am Post subject: |
|
|
Didn't know 45s existed. _________________ Alfa33 QO 1984
Alfa33 1.3i.e. 1994 |
|
Back to top |
|
|
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Mon Sep 16, 2013 9:32 am Post subject: |
|
|
Hope so as its stamped on the side and they sell service kits for them lol |
|
Back to top |
|
|
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Mon Sep 16, 2013 9:33 am Post subject: |
|
|
Hope so as its stamped on the side and they sell service kits for them lol |
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Mon Sep 16, 2013 10:44 am Post subject: |
|
|
Hi
I do have a complete (well, rear was shortened by a lorry) series 3 1.3 carbed 33 sitting on the drive here. This is a hydraulic tappet engine. When it was on the road it had a nice gearbox (with the low ratio diff).
Peter the 'sud guy was going to have it but heard nothing from him in ages.
All the best
Keith _________________ I owe, I owe, its off to work we go.
Bimota Forum
Stafford Christmas Lights
|
|
Back to top |
|
|
johnboy 16 Valve
Joined: 26 Jun 2003 Posts: 1061 Location: margate U.K
|
Posted: Mon Sep 16, 2013 10:52 am Post subject: |
|
|
How much is the gearbox Keith ? _________________ WODA WE NEED? MORE POWER!!
Alfa gt jtdm blackline
1990 S2 16v veloce sleeping!
2002 ts gtv the wifes now
1997 seadoo gsx 800
1999 freestyle superjet |
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Mon Sep 16, 2013 12:04 pm Post subject: |
|
|
Hi
I would rather sell the whole car as it is tbh. No time to strip it down and do anything.
Interior is a mess and the ignition system is off it (used to try and get the other 1.3 running - failed there!).
All the best
Keith _________________ I owe, I owe, its off to work we go.
Bimota Forum
Stafford Christmas Lights
|
|
Back to top |
|
|
johnboy 16 Valve
Joined: 26 Jun 2003 Posts: 1061 Location: margate U.K
|
Posted: Mon Sep 16, 2013 12:12 pm Post subject: |
|
|
Ok no problem Keith _________________ WODA WE NEED? MORE POWER!!
Alfa gt jtdm blackline
1990 S2 16v veloce sleeping!
2002 ts gtv the wifes now
1997 seadoo gsx 800
1999 freestyle superjet |
|
Back to top |
|
|
eagle3 Alfa 33
Joined: 11 Nov 2007 Posts: 402 Location: France
|
Posted: Mon Sep 16, 2013 12:18 pm Post subject: |
|
|
I may be wrong but 1.3s should have 40 Webers or Dellortos I think. _________________ Alfa33 QO 1984
Alfa33 1.3i.e. 1994 |
|
Back to top |
|
|
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Mon Sep 16, 2013 1:24 pm Post subject: |
|
|
they do this one has been upgraded as its a race car, dont know what has been done to the internals
UNfortunatly i have no where to store a whole car |
|
Back to top |
|
|
astudialf Alfa Arna
Joined: 14 Sep 2013 Posts: 5 Location: south
|
Posted: Tue Sep 17, 2013 3:10 pm Post subject: |
|
|
[quo
te="stevecarrcross"]How much[/quote
This engine came out of a s2ti. £70. |
|
Back to top |
|
|
eagle3 Alfa 33
Joined: 11 Nov 2007 Posts: 402 Location: France
|
Posted: Tue Sep 17, 2013 5:06 pm Post subject: |
|
|
astudialf wrote: |
[quo
te="stevecarrcross"]How much[/quote
This engine came out of a s2ti. £70. |
Now that we have a few Sud owners here I think it's important to specify the model.
Is that a Sud or a 33? An S2 33Ti has a 1490cc engine. _________________ Alfa33 QO 1984
Alfa33 1.3i.e. 1994 |
|
Back to top |
|
|
astudialf Alfa Arna
Joined: 14 Sep 2013 Posts: 5 Location: south
|
Posted: Wed Sep 18, 2013 5:55 pm Post subject: |
|
|
eagle3 wrote: |
astudialf wrote: |
[quo
te="stevecarrcross"]How much[/quote
This engine came out of a s2ti. £70. |
Now that we have a few Sud owners here I think it's important to specify the model.
Is that a Sud or a 33? An S2 33Ti has a 1490cc engine. |
Yes, very sorry. This engine came from my very own s2 alfasud. 57k miles. |
|
Back to top |
|
|
stevecarrcross Alfasud
Joined: 25 Aug 2013 Posts: 28
|
Posted: Sun Jan 12, 2014 1:58 pm Post subject: |
|
|
Still on the look out if any still available |
|
Back to top |
|
|
|