View previous topic :: View next topic |
Author |
Message |
mikefitz Guest
|
Posted: Tue Sep 21, 2004 11:44 am Post subject: Part name |
|
|
Hi All,
Recently I had to remove the air filter on my 1.7 8 valve. There is a plastic part that clips onto the under side of the air filter. As far as I know, this is some kind of inter connect for the breather hoses for the carbs. Two of the four smaller breather hoses have broken thier conectors. If I was to go looking for a replacement part. What would I ask for.
Thanks in Advance.
Mike. |
|
Back to top |
|
|
Eddie W Alfa 33
Joined: 31 Jul 2003 Posts: 375 Location: new zealand
|
Posted: Wed Sep 22, 2004 5:24 am Post subject: |
|
|
Hi Mike
I don't know what the factory call it but I would describe it as a "crank case ventilation distributor block"
Regards Eddie _________________ A LITTLE FURTHER A LITTLE FASTER |
|
Back to top |
|
|
|