Alfa Pages

timbo · Alfa Arna Joined: 10 Jun 2003 Posts: 3

Hi all
This is my first post
and I know people get a bit anger when you go straight to this section
but I did own a very tidy alfa 33 for six years(16v quad cam, big momo's ,upgrade chipped and pod filter) not much mods but I loved her until I hit a concrete wall on the hwy at about 100 K's or so a capable of months ago so there not much left

So I have a set of standard mags for sale I'm in brisbane Oz.
Also standard chip
and a gearbox with a story!! needs to be put back together

Tim Crying or Very sad

Scott Sander · Posted: Tue Jun 10, 2003 11:42 pm Post subject:

Do you have any headlights or tail lights Question

Also the centre tray between the A/C control and the ash tray, as long as it is not broken. All the ones I have seen have the clips at the bottom busted. I think this it because people remove them incorrectly.
_________________
Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com

timbo · Alfa Arna Joined: 10 Jun 2003 Posts: 3

Hey Scott
I've got
1 right back tail light
I think

Tim

Alfa33_2ENVY

hey,

sorry to hear about your 33. What sort of rims you got? have you got a pic and how much are you asking for them. as well i want a little info on your chip and gearbox please.

ciao

Scott Sander · Posted: Wed Jun 18, 2003 5:05 am Post subject:

Hi,

Do you know if it is left or right?
Any cracks? Condition?
Are the stripes on the corner over the indicators red or white?
_________________
Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com

Hamish Brown · Posted: Wed Jun 18, 2003 8:07 am Post subject: 33 16V

Hi Timbo

Just wondering where you got your after market rims from im finding it pretty hard to find someone that sells some good looking 7by15 or16 inch rims in aus. If anyone knows, can you give us a hoy cheers . Laughing

timbo · Alfa Arna Joined: 10 Jun 2003 Posts: 3

Hi all

Sorry guys don't get to a computer that much Crying or Very sad

Scott I will have to check
I think it in pretty good nick
Will check for crack and which side it from etc.

I've got the standard mags for sale Ciao
I did have MOMO Very Happy

but insurance company took them with car
MOMO are made to order and suit the 33 (my opinion)

I will try to get picture of smashed car and back lights and standard
Wheels and gearbox and chip

I have standard chip for sale
As I had an up rated chip in when I smash
Got it install by John French Alfa in brisvagas
I think it was imported from Italy or something
Help's with bogging off the mark and let's you rev higher
Pretty good but nothing spectacular

Now the gearbox
I hear a small noise coming from gearbox one day
And was away from home, so went to the nearest servo.
They pull the gearbox out and started to take apart.
And said it had run out of oil
And by the way we cannot put back together Evil or Very Mad

Long story - short had to towed home and it was cheaper to buy
second hand gearbox than find a guy to put back together.
Now I have pulled apart gearbox Confused

How do I post pictures?

Timbo

Scott Sander · Posted: Mon Jun 23, 2003 11:40 pm Post subject:

I have not tried it on this board, but you need to post them to somewhere on the net and then in your message use the tags.

You can see them between the subject and the message body when writing a reply. Use the preview to see how the post will look and edit it till it's correct.
_________________
Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com

Errol · Posted: Thu Jun 26, 2003 4:36 am Post subject:

No door trims by any chance?
_________________
91 Alfa Romeo 33 16v * SOLD*
Lowered 45mm
15 x 7 inch advanti wheels
Falken 195 low profile
K&N Pod filter
Cannon 2inch exhaust from cat-back with 3inch tip.

Ken McCarthy · Posted: Thu Jun 26, 2003 7:37 am Post subject:

Errol

What door trims are you looking for? I think I still have all the door trim panels but not the arm rests (I think they went to Scott).
_________________
Ken McCarthy - 16V Sprint

Scott Sander · Posted: Thu Jun 26, 2003 2:28 pm Post subject:

Ken,

Yeah I got the arm rest. Might have to make a trip up to brisbane soon to collect some other bits.
_________________
Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com

Ken McCarthy · Posted: Fri Jun 27, 2003 12:43 am Post subject:

Scott

Anytime. I am still minding your roof.

Regards
_________________
Ken McCarthy - 16V Sprint

Errol · Posted: Fri Jun 27, 2003 1:12 am Post subject:

Hi ken, i only need the panels. Not the arm rests. What panels do you have ? I need front left and right if thats possible. PM if you can. THanks
_________________
91 Alfa Romeo 33 16v * SOLD*
Lowered 45mm
15 x 7 inch advanti wheels
Falken 195 low profile
K&N Pod filter
Cannon 2inch exhaust from cat-back with 3inch tip.

Ken McCarthy · Posted: Sun Jun 29, 2003 1:17 am Post subject:

Errol

I have all four door trims in good condition. Email me if you are interested. I also have quite a lot of the rest of the interior trim except most of the dash is gone, the seats have gone, and the arm rests as you know. I also have all the seat belts. The webbing probably shouldn't be reused, but the mechanisms etc are all there. There are 101 other bits like windscreen wiper motors, washer bottles & motors, carpet etc and some external panels.

Regards
_________________
Ken McCarthy - 16V Sprint

Errol · Posted: Sat Jul 19, 2003 11:40 am Post subject:

i just want the front right and front left. You dont have you email address in your profile? So how can i contact you?
_________________
91 Alfa Romeo 33 16v * SOLD*
Lowered 45mm
15 x 7 inch advanti wheels
Falken 195 low profile
K&N Pod filter
Cannon 2inch exhaust from cat-back with 3inch tip.