View previous topic :: View next topic |
Author |
Message |
Guest
|
Posted: Tue Jun 17, 2003 11:46 pm Post subject: what will cous overheating? |
|
|
was it too rich or too lean mixture? why? |
|
Back to top |
|
|
Gary UK Alfa Sprint
Joined: 17 Mar 2003 Posts: 218 Location: Darlington UK
|
Posted: Wed Jun 18, 2003 1:07 am Post subject: |
|
|
Lean, as to why I'm sure a physics expert will explain. Won't make the car overheat as such in normal use but will (or can) burn out the valves |
|
Back to top |
|
|
alferr Alfasud
Joined: 02 May 2003 Posts: 76 Location: ausrtralia, south australia
|
Posted: Wed Jun 18, 2003 4:50 am Post subject: |
|
|
the more petrol added to a mixture the cooler the mixture goes! _________________ -=alferr=-
goto #alfa33_net on DALnet |
|
Back to top |
|
|
Chris Notsis Alfasud
Joined: 21 Mar 2003 Posts: 62 Location: Melbourne, Australia
|
Posted: Wed Jun 18, 2003 8:17 am Post subject: overheating |
|
|
As stated, fuel mix can affect engine temp - but more so in the cylinders themselves. I greatly advanced ignition timing can also increase eng. temp.
External causes: failed (closed) thermostat; failed or inefficient water pump; pure water or failed coolant (highly diluted) in the system; locking brakes; high ambient/atmospheric temp; low engine oil level; standing idle in traffic for extended periods; inefficient coolant flow especially through various hoses; a leak in the system; cooling fan not coming on or coming on very late (possible failed thermo-timer). Have you actually measured the coolant temp in the header/expansion tank? There may actually be correct temp but the temp gauge or sender is faulty.
THe 33s are well known for overheating on hot days (whether it's humid or dry).
As you can see, there ae many causes, so you need to work through each one carefully. Start with checking the cooling system itself (temp, flow, leaks etc). _________________ Chris Notsis |
|
Back to top |
|
|
|