View previous topic :: View next topic |
Author |
Message |
dantheman Alfa Arna
Joined: 10 Jul 2007 Posts: 10
|
Posted: Sun Jul 15, 2007 6:23 am Post subject: Fixin up my Alfa33 85 cloverleaf.. |
|
|
hi ive had this car for about a year... sitting in my shed with a head off... problem with it is a blown head gasket.
So...
i got the head all acid bathed and shaved ... nice and shiny
got a whole engine gasket kit
im currently taking the engine out so i can get all the timing right.
oh and gonna clean the block up and paint it with some black engine enamel
its done 140,000 Kms and has been looked after vary well.
interior is vary nice i like it alot!
it has brand new tires..
very nice little car
interior
as u can see ive been fixin the doors and steering column... and that damm speedo case its warped from the sun.. it was like that before i got it i have got it into better shape and it still dsnt wanna fit so im gunna be neading a new one... plz post if u have one u want to sell
Rear of car
colour is gun metal grey and it isnt fadded or anything its good
side
front left quarter panel has been replaced and painted
left 2 cylinders
note its alot cleaner now and has been honed.
heres the head before i got it all done up
if u guys have any tips plz leak em out onto this thread it would be much apreciated
thnx
Dan |
|
Back to top |
|
|
icky Alfasud
Joined: 20 Mar 2003 Posts: 70 Location: Lismore NSW Australia
|
Posted: Sun Jul 15, 2007 8:13 am Post subject: |
|
|
Well I'll be the one to do some advertising for Bobber..
Dan,
Try this link
www.alfa-restoration.co.uk
Click on "restoration Manuals"
If you cant find what you need, post here, someone will help.
Cheers _________________ Specialization is For Insects
1988 33 1.5 S 8V |
|
Back to top |
|
|
Scott Sander Alfa 33
Joined: 20 Feb 2003 Posts: 419 Location: Sydney, Australia
|
Posted: Sun Jul 15, 2007 8:13 am Post subject: |
|
|
So are you going to do the rings, bearings, water pump, timing belts, clutch, valve grind as well? _________________ Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com |
|
Back to top |
|
|
dantheman Alfa Arna
Joined: 10 Jul 2007 Posts: 10
|
Posted: Sun Jul 15, 2007 8:22 am Post subject: |
|
|
i dnt think it needs all that doing to it .. and yes the valves where grinded and got all new seals when the head got shaved i just bought a brand new workshop manual for it... so ive got all the procedures but thnx ill have a look at that site it can only help
dan |
|
Back to top |
|
|
gritsop Green Cloverleaf
Joined: 23 Apr 2003 Posts: 766 Location: Ekali, Athens - Greece
|
Posted: Sun Jul 15, 2007 7:28 pm Post subject: |
|
|
Hi,
Welcome to the board and congrats for the work you are currently doing
When you are done with the repairs it can always be a wise idea to write some lines under those pics and create a nice restoration manual for http://www.alfa-restoration.co.uk
Best regards and keep up the good work, _________________ Thanassis Gritsopoulos
1991 Alfa 33 1.4 IE
2001 Alfa 147 1.6 Distinctive
http://www.alfa-restoration.co.uk
Parts Shop: www.alfa-restoration.co.uk/shop |
|
Back to top |
|
|
dantheman Alfa Arna
Joined: 10 Jul 2007 Posts: 10
|
Posted: Mon Jul 23, 2007 12:57 pm Post subject: |
|
|
some more pics of my car and where its at
|
|
Back to top |
|
|
dantheman Alfa Arna
Joined: 10 Jul 2007 Posts: 10
|
Posted: Mon Jul 23, 2007 1:04 pm Post subject: |
|
|
ok list of parts i need
Left Front Quarter panal
distributor Dizzy
Dash thing with Speddo And Tacho in it
Also i have a Genuine Alfa Romeo Tape player and radio if anyone wants it ill see for cheap |
|
Back to top |
|
|
rsfruitbat Alfa Sprint
Joined: 13 Jun 2007 Posts: 241 Location: Kidderminster
|
Posted: Mon Jul 23, 2007 1:31 pm Post subject: |
|
|
How do people get the engine out without the gearbox . I have always thought its more aggro than its worth and dropped the lot out from underneath . I am open to conversion though |
|
Back to top |
|
|
dantheman Alfa Arna
Joined: 10 Jul 2007 Posts: 10
|
Posted: Wed Jul 25, 2007 9:54 am Post subject: |
|
|
yea that was a bastard but i got it... i may have bent one of the studs that lock into the gearbox
but owell they can easily be replaced
all i did was get a block and tackle and lift the engine out of my car |
|
Back to top |
|
|
dantheman Alfa Arna
Joined: 10 Jul 2007 Posts: 10
|
Posted: Thu Aug 09, 2007 12:32 pm Post subject: |
|
|
Any one got one of the dash things!..i dunno wat the part number is but i will find out.... |
|
Back to top |
|
|
paulhide P4
Joined: 20 Dec 2003 Posts: 1607 Location: Oh Beautiful Billingham
|
Posted: Thu Aug 09, 2007 11:05 pm Post subject: |
|
|
Got a few here in UK, 10 quid each. Quoted 20 pounds postage airmail or 10 pounds postage surface. Any good? _________________ Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188 |
|
Back to top |
|
|
dantheman Alfa Arna
Joined: 10 Jul 2007 Posts: 10
|
Posted: Sun Aug 12, 2007 9:21 am Post subject: |
|
|
hi,
im interested can u plz email me some pics??
dantheman.au@hotmail.com |
|
Back to top |
|
|
|