Alfa Pages

JetJackson · Posted: Fri May 16, 2008 4:32 pm Post subject: WANTED : 15" wheels..???

Does anyone have a set of these wheels in 15" they want to sell? Have seen them on a few 33s over the years. Did they come from early 4 stud GTV or 75?

_________________
1977 Alfasud 16v
http://www.alfasud16v.co.uk

Oggie · Posted: Fri May 16, 2008 5:21 pm Post subject:

I don't think they do them in 15 inch only 14 inch but their is a simular 155 alloy wheel in 15inch that supposed to fit.
_________________
PHAT 33

JetJackson · Posted: Fri May 16, 2008 6:17 pm Post subject:

they did, very similar, i have 1!
_________________
1977 Alfasud 16v
http://www.alfasud16v.co.uk

Oggie · Posted: Fri May 16, 2008 7:51 pm Post subject:

In that case try Alfa aid on 01628788887 , adie has a shed load of alfa alloy in a big shed!?! Laughing

.
_________________
PHAT 33

Oggie · Posted: Fri May 16, 2008 7:52 pm Post subject:

oh and ronal alloy wheels look almost the same but they don't do alfa sizes.
_________________
PHAT 33

greencloverleaf pat · Posted: Fri May 16, 2008 7:55 pm Post subject: wheels

i have a set you can have for £50 but will have to go to my lockup to see what condition they are in.

JetJackson · Posted: Fri May 16, 2008 9:33 pm Post subject:

would you mind having a look and checking? Where are you in the country?
_________________
1977 Alfasud 16v
http://www.alfasud16v.co.uk

greencloverleaf pat · Posted: Fri May 16, 2008 10:06 pm Post subject: wheels

im in west sussex near gatwick airport and i will have a look for you tomorrow.

JetJackson · Posted: Sat May 17, 2008 1:45 pm Post subject:

here are some better pictures of the wheels...

has campanatura cast in the rim...?
_________________
1977 Alfasud 16v
http://www.alfasud16v.co.uk

greencloverleaf pat · Posted: Sun May 18, 2008 3:29 am Post subject: wheels

sorry mate have had a look and mine are different to the ones in your second picture. Crying or Very sad

JetJackson · Posted: Sun May 18, 2008 8:07 am Post subject:

but are they 15s? I'm not too worried about the design, just trying to find some bigger ones.
_________________
1977 Alfasud 16v
http://www.alfasud16v.co.uk

greencloverleaf pat · Posted: Sun May 18, 2008 1:40 pm Post subject: wheels

i will have a look later today.

greencloverleaf pat · Posted: Sun May 18, 2008 6:41 pm Post subject: wheels

the ones i have are 14 inch wheels and have a bit of flakey paint on them also ,
the wheels your after on the second picture are from a 2.0 litre gtv as they are 4 stud.

JetJackson · Posted: Sun May 18, 2008 7:19 pm Post subject:

ah, ok... so not I just need to find the 2.0 GTV forum and ask them!! Laughing

_________________
1977 Alfasud 16v
http://www.alfasud16v.co.uk

Admin · Posted: Mon May 19, 2008 11:16 am Post subject:

Hi

It you are just after 15" 4 stud Alfa wheels then get some from a 145/146/155.

Think you need to machine the centre locating hole about 1mm larger and maybe use some spacers to get the offset correct, but the are fairly commonly fitted.

All the best

Keith
_________________
I owe, I owe, its off to work we go.
Bimota Forum
Stafford Christmas Lights

BigAl · P4 Joined: 06 May 2003 Posts: 2995 Location: U.K Surrey

a while ago i posted some of some wheels for sale by someone else, have a look at the pic of my car, the silver one, there the same.

http://www.alfa-pages.co.uk/viewtopic.php?t=5296&highlight=wheels+bigal
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203

JetJackson · Posted: Tue May 20, 2008 3:56 pm Post subject:

tried alfa aid, they dont have any Crying or Very sad

_________________
1977 Alfasud 16v
http://www.alfasud16v.co.uk