| View previous topic :: View next topic |
| Author |
Message |
BILL
Alfa Sprint
Joined: 04 May 2003
Posts: 154
Location: TRIPOLIS GREECE
|
 Posted: Thu Aug 21, 2003 7:08 am Post subject: REALIGNMENT OF WHEELS |
 |
|
Im taking my car (33 1.4 ie 1992)for a realigment of wheels and i want to know if the 16V uses the same data for the camber caster e.t.c.
Becoase i have 14inc wheels, the shocks absorvers that the 16V uses.Or should i stick to the data for the 1.4ie.
Thanks in advance |
|
| Back to top |
|
 |
gritsop
Green Cloverleaf
Joined: 23 Apr 2003
Posts: 766
Location: Ekali, Athens - Greece
|
| Posted: Thu Aug 21, 2003 4:00 pm Post subject: |
|
|
Hi,
Bill, can you restate what you have written because i cannot understand what you want to ask !?
Regards,
_________________
Thanassis Gritsopoulos
1991 Alfa 33 1.4 IE
2001 Alfa 147 1.6 Distinctive
http://www.alfa-restoration.co.uk
Parts Shop: www.alfa-restoration.co.uk/shop |
|
| Back to top |
|
|
BILL
Alfa Sprint
Joined: 04 May 2003
Posts: 154
Location: TRIPOLIS GREECE
|
| Posted: Thu Aug 21, 2003 4:55 pm Post subject: |
|
|
| After fitting new tyres im taking the car to the mechanik to check camber caster toe in .Are the mesurements the same for the 16V and for the 1.4? |
|
| Back to top |
|
|
gritsop
Green Cloverleaf
Joined: 23 Apr 2003
Posts: 766
Location: Ekali, Athens - Greece
|
| Posted: Thu Aug 21, 2003 9:48 pm Post subject: |
|
|
Hi
According to the workshop manual for the Alfa 33 s2 vehicles with engines of 1.2, 1.3 , 1.5, 1.7 the figures are the same for all cars.
toe out: 4 +-2'
toe out angle : 10'
camber angle : -1 degrees +-30'
caster angle: 2 degrees +-30'
Note: these figures are considered with static car load (about 75 kg in the passenger seats plus about 50kgs luggage)
Hope this helps.
Regards
_________________
Thanassis Gritsopoulos
1991 Alfa 33 1.4 IE
2001 Alfa 147 1.6 Distinctive
http://www.alfa-restoration.co.uk
Parts Shop: www.alfa-restoration.co.uk/shop |
|
| Back to top |
|
|
|
