View previous topic :: View next topic |
Author |
Message |
Adam H Alfasud
Joined: 07 May 2003 Posts: 92 Location: Portsmouth, UK
|
Posted: Thu Sep 25, 2003 7:03 pm Post subject: 16V Exhaust Front Section |
|
|
I'm about to replace my front section of exhaust on my 16v.
My local motor factors and Alfashop can't sell me a front section (heads to triangular flange) of exhaust that doesn't have a cat converter that will fit the 16v that has a triangular flange.
Does anyone know of a shop that can sell me a non-cat front pipe that goes to the triangular flange? It will need to have a threaded socket for the lambda probe.
Many thanks
Adam |
|
Back to top |
|
|
ZeNiTh-PbArM Alfa 33
Joined: 14 Mar 2003 Posts: 388 Location: Paris, France
|
Posted: Fri Sep 26, 2003 6:08 am Post subject: re : exhaust |
|
|
hi
you should be able to get the part from CSC in Italy, i know they have a distributor in UK but i don't kno exacly who it is. the cost is about 150 euros for a front section (very good quality, it's worth the price)
besides, i know Ansa make such a pipe too, but i couldn't manage to get one so i don't know how it is.
last solution is to cut the triangular plate from your cat and weld it onto an OMP GrN front section or a supersprint one.
regards
zp |
|
Back to top |
|
|
Dave (Minari) Alfasud
Joined: 26 Jun 2003 Posts: 37 Location: Bexley, Kent
|
Posted: Fri Sep 26, 2003 7:46 am Post subject: |
|
|
the address of the CSC agents is
http://avanti-motorsport.co.uk
I am sure they are in the west country.
Dave _________________ Retired and working harder than when employed!!! Crap at golf- "Stupid Bl**dy game!" |
|
Back to top |
|
|
|