View previous topic :: View next topic |
Author |
Message |
ZeNiTh-PbArM Alfa 33
Joined: 14 Mar 2003 Posts: 388 Location: Paris, France
|
Posted: Tue Jul 29, 2003 7:00 am Post subject: O2 sensor for 33 : pinout? |
|
|
hi everyone!
i've been working a lot on my 33 these days...replacing the tank, unclogging the breather, de-rusting the floors, changing carpets, replacing the exhaust (btw i found a great substitution pipe for my catalyst at CSC), repairing my speedo, not to mention the "minor work".
Today i'm working on the O2 sensor (aka lambda sond) and i have troubles guessing the pinout ; i have three wires :
pin A : red
pin B : white
pin C : black
from the wiring diagrams i saw that there should be :
-a ground
-a power supply for the heating element
-a signal wire.
Can anyone tell me which is which?
thanks for your help,
regards,
zp |
|
Back to top |
|
|
zp Guest
|
Posted: Tue Sep 09, 2003 7:57 am Post subject: re : lambda sond pinout |
|
|
hi
i'm still looking for an answer if anyone has the information...
thanks in advance,
zp |
|
Back to top |
|
|
Marcin Alfa Sprint
Joined: 13 Mar 2003 Posts: 117 Location: Amsterdam
|
Posted: Wed Sep 10, 2003 8:25 am Post subject: |
|
|
Hi,
from memory:
A: +12V for the heating element
B: signal form the sensor
C: ground
but I'll have to verify that at home.
Cheers
Marcin |
|
Back to top |
|
|
ZeNiTh-PbArM Alfa 33
Joined: 14 Mar 2003 Posts: 388 Location: Paris, France
|
Posted: Fri Sep 12, 2003 8:50 am Post subject: re : pinout |
|
|
hi!
thanks, i'll replace the sensor since the voltage does not seem to have the proper pattern (no oscillation).
regards,
zp |
|
Back to top |
|
|
zp Guest
|
Posted: Mon Sep 29, 2003 11:41 am Post subject: re : pinout |
|
|
hi everyone
i've been able to check the sensor last weekend.
so, th right pinout is :
-red wire : +12V
-white wire : ground
-black wire : signal
regards,
zp |
|
Back to top |
|
|
|