Alfa Pages

BigAl · P4 Joined: 06 May 2003 Posts: 2996 Location: U.K Surrey

Anyone got the dimensions of the hole in the bottom of the gearstick?
As the shaft has snapped off at the weld I can't remove the bush without deforming the hole and getting an inaccurate measurement.
I need an accurate measurement as I plan on pressing in the spherical bearing housing or plastic bearing or making a sleeve into it.
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203

paulhide · Posted: Mon Oct 18, 2010 4:06 pm Post subject:

30.0mm is my best guess.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

BigAl · P4 Joined: 06 May 2003 Posts: 2996 Location: U.K Surrey

Thanks Paul, I need an exact measurement though as I plan to get something that will need to be pressed in.
I know its thin metal but the press in bit wont put much stress on it.
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203

BigAl · P4 Joined: 06 May 2003 Posts: 2996 Location: U.K Surrey

found these
http://www.springfix.co.uk/purchase.php?p_no=R3441&id=134&method=a
http://simplybearings.co.uk/shop/index.php?cPath=3_4520
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203